Unilever logo
Personal care · Saturated steam 4.5 bar · Turnkey

Unilever CIVAC: solar steam from the factory roof

275 kWtinstalled thermal power
4.5 barsaturated steam
BOP and solar fieldshipped pre-assembled
Turnkeybusiness model (plant purchase)
Feb. 2025commercial operation date (COD)
The plant, layer by layer · schematic model
Blue steel supports lined up on the red Unilever roof
The blue supports, already on the roof
A crane lifts a pre-assembled module onto the Unilever roof at sunset
A crane lifts a module onto the roof
Skid with the steam drum and pumps on the roof
The skid: steam drum on top, pumps below
Solar field, generation unit and pipe racks on the roof
Generation unit and the factory piping
Loading the 3D model…Drag to rotate
The challenge
Decarbonise part of the aerosol factory’s 4.5 bar steam demand. There was no free land: the only surface was a 1,600 m² roof with a 7.5% slope, light hollow-core slabs, pipes running across it and earthquake risk.
The solution
An FLT20 field of 8 tandems in a single row, with 528 m² of mirrors, raised 110 cm to clear the pipes. The solar field generates steam directly, with no intermediate fluid: water flows through the receivers and returns to a steam drum, where the steam is separated from the liquid water. From there the steam goes to the factory’s main header, 60 m away. The skid that carries the drum and the rest of the hydraulics was designed by Solatom in Spain and built in Mexico.
Business model
Unilever bought the plant turnkey, and it runs automatically with remote support from Solatom.
Fresnel field mounted on the Unilever rooftop
The field, raised above the rooftop pipes.
A crane lifts a pre-assembled solar module onto the Unilever CIVAC factory roof
Lifting the solar modules onto the roof.
How the plant worksFour operating modes, from start-up to night. Tap to see the animation.